T3 ColorLock Press

Features

• Zeolite and Tourmaline-infused 1 3/4 inch plates minimize damage to hair during color process
• The ColourLock Press' high heat and pressure infuse moisture deep into the hair
• Heat up to 450ºF.
• Should be used as the last step of the coloring procedure.
• Do Not Use ColorLock Press on dry hair.

Directions:

• Towel-dry hair until just damp.  Do Not Use ColorLock Press on dry hair.
• Turn the Power Dial until there is a click sound.  The setting on the setting display should be green.
• Flashing indicator light means that the Press is heating to desired level
• A steady Indicator Light means that the Press has heated to the desired level.
• Set the Press to adjust for hair type:
  setting 1 for Damaged hair
  setting 2 for Fine hair
  setting 3 for Normal hair
  setting 4 for Wavy hair
  setting 5 for Coarse hair

• Pump ColorLock Pressing Spray all over the head, about 10 pumps for shoulder-length hair, and work it in evenly.
• Take a 1-2 inch section of hair and separate it from the rest of hair with a clip. Pull that section taut.
• Glide the Press all the way down the section, starting near the root.  Only do this once per section.
• Repeat on each remaining section of hair.
• When finished, turn the ColorLock Press off by turning the Power Dial until it clicks.
• Style hair with a hair dryer or a styling tool of your choice.
• To achieve maximum benefits of ColorLock, repeat 2 to 3 times weekly.